Chemical Testing Charges

The Sophisticated analytical testing facility is located in an area 2280 sqft. The analytical Quality Assurance and Control Laboratory is NABL accredited and meets ISO 9000 requirements. The facility has separate instrument, sample processing and microbiology laboratories. The state of art equipments includes HPLC, HPTLC, GC, Atomic Absorption Spectrophotometer, Polarimeter, Nano-Drop Spectrophotometer and other equipments. The charges are given below:

1.0 Cosmetic & Essential oil (All Parameters as per NABL Scope)

S.N. Specific tests performed Test method Quantity of sample Required Per Sample Charges (₹)
1.1 Estimation of oil Content Hydrodistilation Method / Solvent Extraction method 500 to 1000 g of raw material 1000
1.2 Alcohol insoluble solid content IS326 (P- 2) 1984 (RA:2000 ) 10 to 15 g oil 250
1.3 Relative density IS326 (P-3) 1998 (RA:2006 ) 10 to 15 g oil 350
1.4 Optical rotation IS326 (P-4) 2005 (RA:2005 ) 10 to 15 g oil 250
1.5 Refractive index IS326 (P-5) 2006 10 to 15 g oil 100
1.6 Evaluation of miscibility in ethanol IS326 (P-6) 2006 10 to 15 g oil 150
1.7 Acid value IS326 (P-7) 2006 10 to 15 g oil 350
1.8 Residue on evaporation IS326 (P-10) 2005 10 to 15 g oil 200
1.9 petroleum and mineral oil IS326 (P-15) 1984 (RA:2000) 10 to 15 g oil 250
1.10 Melting point IS326(P-16) 1989 (RA:2000) 10 to 15 g oil 100
1.11 Freezing point IS326 (P-18)1984 (RA:2000) 10 to 15 g oil 100
1.12 Boiling Point IS326 (P-20)1993 (RA:2000) 10 to 15 g oil 100
1.13 Water content IS326 (P-21) 2001 (RA:2001) 10 to 15 g oil 250
1.14 Citral (mixture of cis & trans) IS:326(P-19) 1998 (RA:2002 1 to 2 g oil 1000
1.15 +/-Limonene IS 326 (P-19) 2002 1 to 2 g oil 1000
1.16 Geraniol IS:512-1988 (RA:2002 ) 1 to 2 g oil 1000
1.17 +/- Cetronellal IS 326 (P-19) 1998(RA:2002 ) 1 to 2 g oil 1000
1.18 Beta-citronellol IS:512-1988(RA:2003 ) 1 to 2 g oil 1000
1.19 1,8-Cineole IS 326(P-19)1998 (RA:2002) 1 to 2 g oil 1000
1.20 Geranyl Acetate IS3241-1985 1 to 2 g oil 1000
1.21 Linalool & Linalyl in menthe oil IS 13261:1991(RA:2002 ) 1 to 2 g oil 1000

2.0 Food & Agriculture Product (All Parameters as per NABL Scope)

S.N. Product Specific tests performed Test method Quantity of sample Required Per Sample Charges (₹)
2.1 Oil, fats and related products Estimation of oil Content Soxhlet method 100 to 200 g of raw material 1000
2.2 Moisture content IS 548 (P-I) 1964(RA:2010 ) method 10 to 15 g oil 200
2.3 Insoluble impurities IS 548 (P-I) 1964 (RA:2010 ) 10 to 15 g oil 250
2.4 Acid value IS 548 (P-I) 1964(RA:2010 ) 10 to 15 g oil 300
2.5 free fatty acid IS 548 (P-I) 1964(RA:2010 ) 10 to 15 g oil 500
2.6 unsaponifiable matter IS 548 (P-I) 1964(RA:2010 ) 10 to 15 g oil 250
2.7 Melting Point IS 548 (P-I) 1964(RA:2010 ) 10 to 15 g oil 100
2.8 Refractive index IS 548 (P-I) 1964(RA:2010 ) 10 to 15 g oil 100
2.9 Specific gravity at 30°C IS 548 (P-I) 1964 (RA:2010 ) 10 to 15 g oil 200
2.10 Titer test IS 548 (P-I) 1964 (RA:2010 ) 10 to 15 g oil 350
2.11 Iodine value IS 548 (P-I) 1964(RA:2010 ) 10 to 15 g oil 500
2.12 Saponification value IS 548 (P-I) 1964(RA:2010 ) 10 to 15 g oil 350
2.13 Acetyl Value IS 548 (P-I) 1964 (RA:2010 ) 10 to 15 g oil 300
2.14 Hydroxyl Value IS 548 (P-I) 1964(RA:2010 ) 10 to 15 g oil 300
2.15 Polenske value IS 548 (P-I) 1964(RA:2010 ) 10 to 15 g oil 300
2.16 Peroxide value IS 548 (P-I) 1964(RA:2010 ) 10 to 15 g oil 300
2.17 Mustard oil Essential oil as Allyl Isothiocyanate IS 548 (P-I) 1964(RA:2010 ) 10 to 15 g oil 500
2.18 Ghee Reichert-Meissl Value IS 548 (P-I) 1964(RA:2010 ) 10 to 15 g oil 500
Adulteration Tests in Oils (All Parameters as per NABL Scope)
2.19   Sesame oil IS 548( P-II)1976 (RA:2010 ) 10 to 15 g oil 250
2.20 Argemone oil IS 548( P-II)1976(RA:2010 ) 10 to 15 g oil 250
2.21 Linseed oil IS 548( P-II)1976(RA:2010 ) 10 to 15 g oil 250
2.22 Cottonseed oil IS 548( P-II)1976(RA:2010 ) 10 to 15 g oil 250
2.23 Karanja (pungam)oil IS 548( P-II)1976(RA:2010 ) 10 to 15 g oil 250
2.24 Hydrocyanic acid IS 548( P-II)1976(RA:2010 ) 10 to 15 g oil 250
2.25 Mineral oil test IS 548( P-II)1976(RA:2010 ) 10 to 15 g oil 250
2.26 Ground nut oil IS 548( P-II)1976(RA:2010 ) 10 to 15 g oil 250
2.27 Kusum oil IS 548( P-II)1976(RA:2010 ) 10 to 15 g oil 250
2.28 Castor oil IS 548( P-II)1976(RA:2010 ) 10 to 15 g oil 250
2.29 Neem oil IS 548( P-II)1976(RA:2010 ) 10 to 15 g oil 250
2.30 Other oil in castor oil IS 548( P-II)1976(RA:2010 ) 10 to 15 g oil 250
2.31 Fatty acid (C8-C24) IS 548 (P-III)1976 (RA:2009) 10 to 15 g oil 2500
2.32 Neem Oil Azadirachtin IS 14299:1995 10 to 15 g oil 1000

3.0 Building materials (All Parameters as per NABL Scope)

S.N. Product Specific tests performed Test method Quantity of sample Required Per Sample Charges (₹)
3.1 Soil & Clay, Plant materials etc Ph (5% aquous solution) at 27°C IS2720(P-26)1987 50 to 60 g 100
3.2 Moisture content IS2720(P- 9)1992 (RA:2002) 50 to 60 g 200
3.3 Sodium IS9497:1980 (RA:2002) 50 to 60 g 250
3.4 Potassium IS9497:1980 (RA:2002 ) 50 to 60 g 250
3.5 Nitrogen IS 5194, 1989 (RA:2002 ) 50 to 60 g 500
3.6 Available phosphorous IS 5305-1969 (RA:2003)/IS 6092 (P-3/4) 2004 50 to 60 g 500
3.7 Total organic content IS2720(P-22)1972 (RA:2010 ) 50 to 60 g 500
3.8 Calcium Carbonate IS2720(23)1976 (RA:2006 ) 50 to 60 g 250
3.9 Total soluble sulphate IS2720(27)1977 50 to 60 g 500
3.10 Bulk density IS 918-1985 50 to 60 g 200
3.11 Loss of ignition IS 2840-2002 50 to 60 g 200
3.12 CaO IS 10429-1982 (RA:2001 ) 50 to 60 g 500
3.13 MgO IS 10429-1982(RA:2001 ) 50 to 60 g 500
3.14 Fe2O3 IS 10429-1982(RA:2001 ) 50 to 60 g 500
3.15 Non NABL Testing Heavy Metal in Soils Preparation charges/ Sample 50 to 60 g 400
Sample analysis by AAS / metal 500

4.0 Water (All Parameters as per NABL Scope)

S.N. Specific tests performed Test method Quantity of sample Required Per Sample Charges (₹)
4.1 pH value IS 3025(part 11) 1983 (RA:2012) 100 ml 100
4.2 Conductivity IS 3025 (P-14)2013 100 ml 100
4.3 Total Solids  IS 3025 (P-15)1984 (RA:2009) 100 ml 100
4.4 Total Dissolved solids  IS 3025(P-16) 1984  (RA:2006) 100 ml 100
4.5 Total Suspended solids IS 3025 (P-17) 1984 (RA:2012) 100 ml 100
4.6 Total Volatile solids IS 3025 (P-18) 1984 (RA:2012) 100 ml 100
4.7 Total fixed  solids IS 3025 (P-18) 1984 100 ml 100
4.8 Total hardness (as CaCO3) IS 3025(part 21)1983 (RA:1996) 100 ml 500
4.9 Total alkalinity as CaCO3 IS 3025(part 23) 1986 (RA:2003) 100 ml 500
4.10 Sulphate as SO4 IS 3025(part 24) 1986 (RA:2003) 100 ml 300
4.11 Chlorine Residual IS 3025(part 26) 1986 (RA:2003) 100 ml 300
4.12 Dissolved Phosphorus as P IS 3025(part 31) 1988 (RA:2003) 100 ml 500
4.13 Chloride as Cl IS 3025(part 32) 1988 (RA:2003) 100 ml 250
4.14 Free ammonia as NH3 IS 3025(part 34) 1988 (RA:2009) 100 ml 250
4.15 Nitrate (as NO3) IS 3025(part 34) 1988 (RA:2009) 100 ml 250
4.16 Total Arsenic as As IS 3025(part 37) 1988 (RA:2003) 100 ml 500
4.17 Dissolved oxygen IS 3025 (P-38) 1989 (RA:1999) 100 ml 250
4.18 Oil and Grease IS 3025 (P-39) 1991(RA:2003) 100 ml 250
4.19 Calcium as Ca IS 3025(P-40) 1991 (RA:2003) 100 ml 500
4.20 Cadmium IS3025(part 41) 1992 (RA:2003) 100 ml 500
4.21 Copper IS 3025(part 42) 1992(RA:2003) 100 ml 500
4.22 Phenolic compound (as C6H5OH) IS 3025(part 43) 1992 (RA:2003) 100 ml 500
4.23 BOD at 27°C for 3 days IS 3025 (P-44) 1993 (RA:1999) 100 ml 500
4.24 Sodium as Na IS 3025 (P-45)1993(RA:2003) 100 ml 250
4.25 Potassium as K IS 3025 (P-45)1993 (RA:2003) 100 ml 250
4.26 Magnesium as Mg IS 3025(part 46)1994(RA:2003) 100 ml 500
4.27 Lead as Pb IS 3025(part 47)1994(RA:2003) 100 ml 500
4.28 Mercury as Hg IS 3025(part 48) 994(RA:2003) 100 ml 500
4.29 Zinc as Zn IS 3025(part 49) 1994 100 ml 500
4.30 Carbonate as CO3 IS 3025(part 51) 2001 100 ml 250
4.31 Bicarbonate as HCO3 IS 3025(part 51) 2001 100 ml 250
4.32 Chromium as Cr IS 3025(part 52) 2003 100 ml 500
4.33 Iron as Fe IS 3025(part 53) 2003 100 ml 500
4.34 Nickel as Ni Is 3025(part54) 2003 100 ml 500
4.35 Aluminum as Al IS 3025(part 55) 2003 100 ml 500
4.36 Selenium as Se IS 3025(part 56) 2003 100 ml 500
4.37 Boron as B IS 3025(part 57) 2005 100 ml 500
4.38 COD IS 3025 (P-58) 2006 100 ml 1000
4.39 Manganese as Mn IS 3025(part 59) 2006 100 ml 500
4.40 Barium as Ba Annex F of  IS 13428 2005 100 ml 500
4.41 Molybdenum APHA 22nd Edi. 3111B 100 ml 500

5.0 Pesticide Residue ( Non NABL Testing)

S.N. Specific tests performed Test method Quantity of sample Required Per Sample Charges (₹)
5.1 Water Organochlorin pesticide By GLC 0.01 to 10 % 2500
  Water  By GLC Organochlorin pesticide +Organophosphorus pesticide   0.01 to 10 % 4000
5.2 Plant materials Organochlorin pesticide By GLC 0.01 to 10 % 2500
5.3 Oils & fats Organochlorin pesticide By GLC 0.01 to 10 % 2500
5.4 Essential oils Organochlorin pesticide By GLC 0.01 to 10 % 2500
5.5 Other Food Materials Organochlorin pesticide By GLC 0.01 to 10 % 2500

6.0 Biological products ( Non NABL Testing)

S.N. Product Specific tests performed Test method Quantity of sample Required Per Sample Charges (₹)
6.1 Biofertilizers , Biopesticides and other Biological products Total Microbial Count (C.F.U) Pore plate mathod 100 – 200 g  2000
6.2 Ph As per BIS method 100 – 200 g 100
6.3 Moisture % As per BIS method 100 – 200 g 200
6.4 Total Nitrogen As per BIS method 100 -200 g 500
6.5 Phosphorus As per BIS method 100 -200 g 500
6.6 Conductivity As per BIS method 100 -200 g 100
6.7 Ph As per BIS method 100 -200 g 100
6.8 Heavy Metals /metal/sample Raw sample by AAS 5 -10 g 900
Prepared sample by AAS 10-20 ml 500

7.0 Other test ( Non NABL Testing)

S.N. Product Specific tests performed Test method Quantity of sample Required Per Sample Charges (₹)
7.1 Any products / samples Quantitative / Quantative test on GLC / sample   500
7.2 Qualitative / Quantative test on HPLC / sample   500
7.3 Heavy metals on AAS (Rs. 400 sample preparation charges extra if applicalbe) / metal   500
7.4 Chemical fingerprinting by HPTLC / sample   1500